Car wash payment terminals and distributors

Payment and command
terminal - Esa Start

Control unit for stations until 6 wash program commands


FEATURES:

Phisical dimensions: 900x490x266mm
Support dimensions:750x490x266 mm
Dimensions of support for installation behind window: 750x 490x490 mm
Weight of machine (box dispenser included): 46 Kg
Support weight: 26 Kg
Power supply: 18Vca + 18 Vac 50Hz
Peak power consumption: 80 VA + 40 VA
Heater power consumption: 100 (250) W 
Operating tempeature (without heater): 0 .. 60°C 
with heater: -15 (-30) .. 60°C

Bancknotes accepted:
from 5 to 10 Euro (coin validator VBM7 model)
from 5 to 50 Euro (coin validator VBM8 model)

Coins accepted: dai 5c ai 2Euro (1 and 2c on request)

Output commands:
- NA+NC ralay contacts
- Code BCD or Decimal
- It is possible to agree the output fuctions

Input commands :
- Ralay input, 24Vac
- Code BCD or Decimal
- It is possible to agree the input fuctions


SPECIAL FEATURES:

- 20x2 alphanumeric characters back-lighted LCD display
- Banknote and coin validators with antitheft detectors
- 3 tubes change dispenser (about 200 pieces each tube)
- Battery to grant operation in case of lack of primary power supply
- Iron closet
- Local alarm against burglary, theft, effraction


OPIONS:

- Recheargeable electronic payment key
- (*) Reader/writer magnetic microcard (BIP model)
- (*) Reader/writer magnetic card (SMA4 model)
- (**) Chip-Card reader/writer
- It is possible to dispense boxed products (see ESA standard model); each box-section additive decrease one wash command
- (*) Ticket printer
- (**) Remote control with RS485, Modem or GSM
- (**) Transmission of sms alarm by GSM on machine to maintenance engineer GSM

(*) the systems indicates cannot be supplied at the same time
(**) the systems indicates cannot be supplied at the same time

Coin change/Token change - Master

Distributor with 1 to 3 types of coin/token (about 2000 pieces each type).


FEATURES:

Phisical dimensions: 814x490x265mm
Support dimensions:750x490x265 mm
Dimensions of support for installation behind window: 750x 490x490 mm
Weight of machine: 54 Kg
Support weight: 26 Kg
Power supply : 18Vca + 18 Vca 50Hz
Peak power consumption: 70 VA + 60 VA
Heater power consumption: 100 (250) W 
Operating temperature (without heater): 0 .. 60°C 
with heater : -15 (-30) .. 60°C

Number of hoppers: max 3
Hopper capacity: 2000 pz each
Coins/tokens diameter: 19 .. 30 mm
CoinS/tokens depth : 1 .. 3 mm
Low pieces warning level: about 200 pieces
Coin eject velocity: up to 4 pieces/sec.

Bancknotes accepted:
from 5 to 10 Euro (coin validator VBM7 model)
from 5 to 50 Euro (coin validator VBM8 model)

Coins accepted: dai 5c ai 2Euro (1 and 2c on request)


SPECIAL FEATURES:

- 20x2 alphanumeric characters back-lighted LCD display
- Banknote and coin validators with antitheft detectors
- Battery to grant operation in case of lack of primary power supply
- Iron closet
- Local alarm against burglary, theft, effraction


OPTIONS:

- Back opening
- Recheargeable electronic payment key
- Ticket printer
- (**) Remote control with RS485, Modem or GSM
- (**) Transmission of sms alarm by GSM on machine to maintenance engineer GSM



(**) the systems indicates cannot be supplied at the same time

Card distributor - Tex


This distributor are equipped for 1 or 2 card dispensers.

FEATURES:

Phisical dimensions: 766x490x217mm
Support dimensions:750x490x217mm
Dimensions of support for installation behind window: 750x 490x490 mm
Weight of machine: 46 Kg
Support weight: 21,5 Kg
Power supply: 18Vca + 18 Vca 50Hz
Peak power consumption: 70 VA + 60 VA
Heater power consumption: 100 (250) W 
Heater power consumption: 100 (250) W 
Operating temperature (without heater): 0 .. 60°C 
with heater : -15 (-30) .. 60°C

Number of dispensers: 2 for card only or card in flow-pack
Dispenser capacity: from 200 to 800 cards
Tickness of cards: from 0,18 to 0,8 mm
Dimensions of standard cards : 85,7 x 53,9 mm
Dimensions of cards in flow-pack: max 60 x 120 mm
Coin change hopper capacity: 2000 pieces (one type of coin)
Low pieces warning level: about 200 pieces
Coin eject velocity: up to 4 pieces/sec.

Bancknotes accepted:
from 5 to 10 Euro (coin validator VBM7 model)
from 5 to 50 Euro (coin validator VBM8 model)

Coins accepted: dai 5c ai 2Euro (1 and 2c on request)


SPECIAL FEATURES:

- 20x2 alphanumeric characters back-lighted LCD display
- Banknote and coin validators with antitheft detectors
- Battery to grant operation in case of lack of primary power supply
- Iron closet
- Local alarm against burglary, theft, effraction


OPTIONS:

- Recheargeable electronic payment key
- Recheargeable electronic payment key
- Ticket printer
- (**) Remote control with RS485, Modem or GSM
- (**) Transmission of sms alarm by GSM on machine to maintenance engineer GSM



(**) the systems indicates cannot be supplied at the same time