Touch-system


The system is composed of a reader to be installed in a very easy way and of devices for the customers which are very practical and resistent. The devices surface is completely in stainless steel and allows the one wire transmission of the electric signals.


FEATURES:
Power supply:2 VDC - 500 mA

VERSIONS:
- payment system (prepaid and rechargeable device for automatic distributors with coin validator
MAD-01 and 16x2 char LCD display)
- prepaid or subscribtion access system (coupling with parking entries/exits, electrical and revolving doors...)
- safety access system with differentiated codes


OPTIONS:
- 24VAC - 12VDC power supply
- 220VAC - 12VDC power supply

Banknotes validators with stacker VBM7 and VBM8 models


VBM 7: Accept banknotes from 60 to 70 mm of width (5 and 10 €)
VBM 8: Accept banknotes from 60 to 82 mm of width (5, 10, 20, 50 € - max 200 €)

Both the acceptor are equipped with removeable banknotes packer realized for 400, 600 or 1100 pieces models.

FEATURES:
Phisical dimensions of VBM7: 261(height) x 98(width) x 144mm (depth with 400 pieces stacker; depth 168mm with 600 pieces stacker; depth 225mm with 1100 pieces stacker).

Phisical dimensions of VBM8: 261(height) x 116(width) x 144mm (depth with 400 pieces stacker; depth 168mm with 600 pieces stacker; depth 225mm with 1100 pieces stacker).

Installation: directly on machine or with support plate.

Bankone accepted (base version): Euro banknotes (each side from 5 to 50€ (to 200€ on request).
- Is possible store the accept-data of other and new banknotes (this operation must be realised in the SIDA laboratory).

Power supply: 12 VDC - max 4A.

Interface:
    TTL serial
   
Light indications of bi-colours led,
   lighted green = in service
   lighted red = error/out of service
   blinking red =  stacker full
   switched off = not available

OPTONS:
- Serial TTL to RS232 interface
- Parallel interface with 8 open-collector outputs and 1 Input (5..30VDC).

Coin validator MAD-01


The coin validator MAD-01, in addition to the use mentioned above as Touch-system, is interchargeable with the main coin validators on the market at present time.


FEATURES:
- Phisical dimensions: 88,5 x 101 (height) x 54 mm
- Power supply: 12VDC / 500 mA
- Number of selectable coins: max 18.


VERSIONS:
- Serial
- Executive
- Parallel open collector (8 linee outs)
- Serial TTL


OPTIONS:
- Programmer Kit for PC
- Serial TTL to RS232c interface

 

RND-4
Desktop automatic change dispenser

FEATURES:
- Phisical dimensions: 274,5 (Length) x 98,5 (Width) x 316 (Height) mm
- Capacity of each tube: from 100 to 420 coins (according of tubes length and depth of coins )
- Power supply : 12VDC / 1,5 A max
- Interfaces: RS 232, MDB


AVAILABLE MODELS:
RND4-CF/UF (front keypad/front out coins)
RND4-CF/UL (front keypad/lateral out coins)
RND4-CL/UL (lateral keypad/lateral out coins)
RND4-CL/UF (lateral keypad/front out coins)
RND4-CP/UF (palm-top control/front out coins)
RND4-CP/UL (palm-top control/lateral out coins)


OPTIONS:
Palm-top control with keyboard and display
Data transmission and backup

Sherpa
Rechargeable automatic
change dispenser